The Most Common Errors While Using A Sewing Machine – Part One

Modern sewing machines are wonderful devices that not only make sewing an easier chore to do but have a bunch of features that make them pretty much error-proof. Of course, that is not how it seems to a lot of people. There are quite a few people out there, and maybe you are one of them, that really get tired of their machine acting up in one way or another. If you don’t believe me, then all you have to do is read some of the sewing machine reviews and you’ll see what I am talking about. It seems like there are quite a few machines out there that are rebelling against their users.

It would be easy to blame the machine, but unfortunately it isn’t the machine’s fault—at least nine times out of ten. Most of the common “malfunctions” that crop up during sewing have more to do with user error than a shoddily designed machine. I hate to break it to you but it’s the truth.

Fortunately, it is something that can be remedied. Today, I am going to show you some of the most common sewing machine errors and the best sewing machine remedies for these errors. Fixing these problems as they arise will allow you to solve them quickly and get on with the task at hand.

Problem #1: My Needle Keeps Unthreading

This is the most common problem. You have just threaded your needle and as soon as you start sewing—bam—it comes unthreaded. Fortunately, this is easy to solve. First off, always make sure you have an adequate amount of thread pulled through the needle and out the back of the machine. At least several inches. Second, make sure that your needle is at the highest position possible before you start sewing. You can make sure that the needle is fully raised by checking the top of your sewing machine. If you can see the take-up lever, then the needle is fully raised. If you can’t, then hand crank your machine until you can.

Problem #2: My Fabric Is Hyperactive!

If you are attempting to thread your garment or piece of fabric and it just won’t sit still long enough to finish the task, then you don’t have the presser foot lowered. The presser foot holds down the fabric so you can stitch neatly. If it’s not lowered, your fabric will move with the needle. Don’t let that happen, lower your presser foot.

Problem #3: Uneven Stitching

If you just finished doing a stitch and it looks really loose on one side and really tight on the other side, then you most likely have a tension problem. Check the settings on your machine and make sure that the tension is set correctly. If that still doesn’t fix the problem, then check your bobbin and make sure that it is not only inserted in the machine in the correct way, but that the thread is pulled through those grooves that are in the bobbin case.

The Most Common Errors While Using A Sewing Machine – Part Two

In my last article, I attempted to take on some of the most common problems that people complain about in sewing machine reviews and give a solution to these problems. Once I finished however, I realized that I had missed quite a few common problems, so I have decided to do a second part to my original article and attempt to address them today. Here are the most common sewing machine problems and their solutions, part two. Enjoy.

Problem #4: My Machine Punches Holes In My Fabric

If you are attempting to sew and your machine is trying to make Swiss cheese out of your fabric, then you are most likely using the wrong needle. Needle choice is the absolute most important choice you can make. And torn up clothing isn’t the only problem with using the wrong needle. If you have the wrong needle inserted into your machine, then you can have a wide array of problems. You can mess up the timing on your machine, throw a bobbin or damage your bobbin hook. That is why it is absolutely necessary to choose the right needle for the machine, the stitch you are doing and the fabric you are stitching.

Problem #5: My Stitches Are Too Tight

If you are sewing and notice that your stitches are a little too tight on the top, then you have a problem that needs to be addressed immediately. Sometimes this problem arises because the tension isn’t correctly set on the machine, but that isn’t always the case. Sometimes it’s a mistake you made while threading the machine.

When you wind the bobbin, you often place the end of the thread on the tension disks—which is standard practice. However, you also have to make sure that you remove it before you start sewing. If you don’t, then you often end up with a stitch that is way too tight. And that is no good for anyone.

Problem #6: My Thread Keeps Knotting

If your thread keeps knotting and are creating problems with your garment or jamming up your machine, then you might have a problem with one or more parts of your machine. First, you want to make sure that your thread is sticking out of the back of your sewing machine. Second, start your sewing a little further from the edge. If there isn’t enough fabric when you start, then it can cause the thread to knot up. Don’t worry though, you can always backtrack to give take your stitches all the way to the edge. Just be sure that you don’t go over the edge and then try to back track because that will also knot up your threading. Be vigilant and you should be alright.

And that concludes my article on the best sewing machine solutions for the most common problems. If I think of any more, then I will be sure to write another article, but I do think that this two part articles covers most of the primary ones.