A question that is posed to me on a regular basis – as well as being posed in numerous online sewing machine reviews, is how to sew on buttons. For some people, stitching on buttons is one of the easiest things in the world, but for others it is a project that is fraught with a lot of frustration and heartache. Today, I am going to tackle this subject and tell you how you can sew on buttons like a seasoned pro.
One of the very last things a person does when they are finishing up their sewing is to put on buttons. It seems like they are the perfect accent to any garment job. However, it is also one that causes the most headaches. Many people find them to be tedious, time consuming and a general pain in the you-know-what. This is because is can be very hard to make them look uniform. At least, that is what it seems like.
In reality, sewing on buttons is as simple of a task as anything else done with your sewing machine. You just have to take your time and follow the best sewing machine button method. A time-honored one that will assure that your buttons not only look professional but don’t give you a bunch of gray hairs stitching them on. Here is the method:
Before you start you are going to have the right equipment. The first thing that you’ll need is a sewing machine that is capable of doing zig zag stitches. The next thing you’ll want to have is a little device that attaches to your machine called a button sewing foot. You can still sew on a button without this device, but I personally recommend that you don’t. This attachment has saved me a ton of aggravation.
Of course, if you don’t have a button sewing foot – or are adamant about not purchasing one – then you can do it the hard way. You can remove the presser foot and hold down the button using only the ankle of the sewing machine.
After getting your equipment together, it is now time to place the button. Figure out where you want it on the garment and tape it down securely with a piece of scotch-tape. Don’t worry, your machine will stitch right through the tape and when you are done it will peel off effortlessly.
Now lower your feed dogs. If your machine has a button setting, then choose that and the feed dogs will be lowered automatically. Attach your button sewing foot (if you are using one) and then select your stitch. If your machine has a button stitching setting, then it will select the stitch for you. If not, then just choose a zig zag stitch with a stitch length of zero.
Hand crank the machine so the needle goes through the left button hole. Do the same on the right hole. Ensure that the needle hits the center of each hole. Once you have done that, you are now ready to begin stitching.
Stitch approximately 9 stitches – very slowly. Now raise the presser foot and remove the fabric with the button on it. Snip the top and bottom threads, leaving about 4-5 inches of thread hanging from both. Wrap these “tails” of thread around the bottom portion of the stitches. Underneath the button but still on top of the fabric. Take a hand needles and insert the tails through the fabric and tie them into a knot. Trim as necessary. Congratulations, you have now sewn on a button!