Learning The Basic Parts Of A Sewing Machine
This article is for those who are inexperience using sewing machines. It is intended for novices who have basically no knowledge of these devices but want to begin to learn about them. Which means that if you have intermediate or advanced sewing machine knowledge, then you are probably going to be quite bored with it. That’s because today we are learning about the parts of a sewing machine.
Some of you might scoff at the idea that someone needs to be taught the basic parts of a sewing machine, but let me tell you that it isn’t funny at all. This is the kind of knowledge that one needs as they are beginning to use this machine and judging from sewing machine reviews, is a topic that really needs to be addressed. So without further adieu, let’s begin with basic sewing machine anatomy.
The Power Switch
One of the most important parts of a sewing machine, as well as one of the parts that is most frequently used, is the power switch. This turns the device on and off and is located in different places on different models. Usually on the top or the back of the machine.
The Spool Pin
After finding the power switch, you can now look for the spool pin. This is a small pin that is designed to hold your spool of thread. It is usually located on the top of the machine and is made of plastic or metal.
The Bobbin Winder And Bobbin Winder Stopper
Located next to the spool pin is the bobbin winder. It’s a small horizontal wheel that is used to wind thread onto your bobbin. Next to that is a small pin called a bobbin winder stopper.
The Thread Guide
This is a small funny shaped guide with a simple purpose. It’s designed to guide thread from the spool to the bobbin winder.
Stitch Adjustment Buttons
This may be manual buttons or switches or an electronic one, depending on your sewing machine model. However, no matter which one it is, the point of it is the same. To select the length, type and direction of the stitch.
This is the part that moves vertically as you stitch.
This is a wheel with numbers on it. It is usually located near the take-up lever.
Needle Clamp Screw
Located under the arm of the machine. Its used to hold the needle in place while you are sewing.
This is under the needle clamp screw. This holds your fabric or material in place.
This is the plate underneath the needle.
The Feed Dog
Located under the presser foot and on the needle plate. It’s a guide that feeds the fabric while you are sewing.
Bobbin Cover Release
These is the last part on the machine. It releases the cover so that you can access the bobbin and insert or remove it.
And that is all there is to it. This may not be the best sewing machine anatomy lesson, but it is one that will allow you to learn your machine quickly and easily.